Before Installation
Preparing the work area: One of the most troublesome factors when installing window tint is free-floating dust. Particles that get sealed between the tint and the glass are there permanently and may be a source of damage. This is a job best done in a closed, controlled area -- as dust-free as possible and away from the elements.

The Trim Company, Inc.
P. O Box 833
Grayson, GA 30017
Phone: 770-982-7871
Nextel: 154*21*35447
E-mail: Click Here

Home Installation
Tip: To make it easier to separate and pull back the backing, in one corner of the tint place two pieces of tape facing each other on either side of the film. Then pull the pieces of tape away from each other so that they function as pull tabs

Auto Installation

Important: Before considering this installation, check your state's restrictions on the degree of tint that's permitted. Also note that some states have separate regulations for the degree that's permitted on the rear and rear-side windows versus the front. Look for these in a specific section on lighting regulations in the motor-vehicles section of your annotated state code. The state regulations will likely reference and expand upon regulation No. 205 of the Federal Motor Vehicle Safety Standard.

Installation Questions
Please feel free to contact us directly with any questions concerning our installation services.

Special Installation Needs?
Be sure to ask one of our sales consultants about any special requirements for each product. We wil do our best to provide the latest information on proper installations.